• Arabesque 001
  • sam3707
  • CC-Redline-41-at-Newport-Bermuda-800
  • Sabre 362 Shok-o-la
  • GUNBOAT_55-001_Vanquish.jpg
  • Aurora_Sabre_362_TWO.jpg
  • 12_Meter_Nefertiti_Sea_Trials.jpg
  • GUNBOAT_60-002_Flow.jpg
  • Frers_53_Encounter.jpg
  • J111_Arabella.jpg
  • Farr_40_Barking_Mad_02.jpg
  • CC_115_Sailing_1.jpg
  •  SAM5102
  • Tripp-56-Passion-4-C.jpg
  • Dufour_Grand_Large_500_1.jpg
  • J160_Hana_Hou_Diamond_Head.jpg
  • Tartan_4700.jpg
  • e33_Sailing_Near.jpg
  • Lark_47_Sloop_06_2012_BBY.jpg
  • Morris_36_Integral.jpg
  • Magnum_70_Birdseye_01.jpg
  • CBS_Providence_RI.jpg
  • AopZ_Contest_20100825_1728.jpg
  • KRITTER_VIII_-30LI_Integral.jpg
  • Galene_Prout_63.jpg
  • Kallisto_56_Image_02.jpg
  • Solaris_70_Ventus_02.jpg
  • Finn_Flyer_42_FM2012AT2.jpg
  • Bordeaux_60_Disco_Inferno.jpg
  • MAT_1010_Matador.jpg
  • Contest_72CS_Mallorca_2014.jpg
  • Encounter_2015_Frers_53_3.jpg
  • Leopard 3 RTIR 2015

Hydraulic Integral Adjusters

HydraulicIntegralAdjusterspdfSpecification Table

SAILTEC was one of the first companies to combine a hydraulic cylinder with a small hydraulic pump commonly known as an Integral.

For almost 30 years SAILTEC has manufactured and improved the Integral. This proven Integral hydraulic adjuster now features a low profile hydraulic pressure gauge mounted at top of cylinder tube. The top mount location allows easier gauge reading and low profile provides secure and snag-free operation.

SAILTEC has also modified the design of the pump lever and handle on the integral adjuster. This new design provides a more compact dimension to the integral assembly and enhances product appearance with 316 stainless steel handle and new textured all-weather handgrip (Kung Foo Grip).

Integral Attributes

Larger diameter piston rod

  • Resists side load deflection
  • Distributes seal contact for longer life

Double Rod Seals Guides

  • Clean, scrape and seal piston rod for longer, leak free service life
  • Sizes from -08 to -30 are produced and stocked in various stroke lengths: 226mm/8.9” to 421mm/16.5”
  • 250 MM (9.8” – 10.5”) are specifically made to replace older Navtec integrals without modifying the backstay length)
  • Custom lengths and strokes are common

Demand for variety

  • We have never attempted cost cuts by reducing rod diameter, installing low quality seals or using inferior finishes
  • Available in black hard-coat, clear anodize or T316 SS w/#4 polish.

Proven Design – available since 1983

  • We have never attempted cost cuts by reducing rod diameter, installing low quality seals or using inferior finishes
  • Available in black hard-coat, clear anodize or T316 SS w/#4 polish.

Specialized and Focused

  • Developing and manufacturing high quality marine hydraulic systems is our sole purpose at SAILTEC.